Handheld Flowmeter Installation Manual

Attempting to characterize volume of liquid flowing through your pipes? So, we got good news for you. WEIBAO developed a very simple and practical live Flowmeter. With the help of this tool, take reading very quickly and correct too. However, before you get started using this flow meter it is crucial that you install it to a tee. This guide provides you with necessary steps to installing and setting up your WEIBAO Flowmeter for, better use easily. 

How to Install your Flowmeter

Step 1.  Get all of your tools and supplies together first. In order to perform this task, you will require a spanner and some piping as well as the WEIBAO Flowmeter kit (which includes everything required for your convenience. 

Step 2: Turn Off the Liquid you Need to Measure Before you begin, release any built-up pressure in the pipes to work safely. 

Step 3: Determine Where to Install the Flowmeter This requires a nice long straight piece of pipe where the vortex Flowmeter  can be nicely place on It would also just install in an easy place for you to get back at later where accessing it or maintaining on it is not so troublesome. 

Step 4: Place the Pipes Around the Flowmeter Once you have located a better spot, attach your pipes around it. Pipes are properly screwed on the Flowmeter. My pipes tend to be a little loose (also ask my wife), that can lead to inaccurate readings and this will eventually cause some further confusion. 

Step 5: Use a wrench to tighten all of the connections. If you do not make everything as secure as possible, there is a possibility that there may be leaks. Tightening the connections is very important. 

Set Up your Flowmeter 

Step 1: Now that your Flowmeter is installed, you can turn the liquid on that you wish to measure. This is the first step to getting everything you need ready to use. Step 2: Next, you can press the power button on your WEIBAO Flowmeter. It is easy to find and easy to press. Step 3: After you turn it on, follow the on-screen instructions to set up your Flowmeter. you will need to calibrate it based on the type of liquid you are measuring. Step 4: After you set it up and calibrate it properly, you can start measuring how much liquid you have. Get your air flow meter Ready Fast. If you follow these five simple steps closely, you will have your WEIBAO handheld Flowmeter to use in no time at all. If you have any questions or if something wrong happens when you are trying to set it up, you can contact us. We are here to help you with any issues you might have. 

Ensure your Flowmeter Performs Properly

If your Flowmeter is not installed correctly it will not work. If it is not properly installed you will get wrong readings and this can cause issues down the road. Following this guide closely will ensure that your Flowmeter is being well configured, ensuring accurate and good quality measurements.  

Accurate Readings Mean Proper Installation

Measuring Liquid in Pipes – Accurate Readings are Crucial The correct and safe installation of your WEIBAO handheld gas flow meter is crucial to getting accurate readings. By now you must have gotten the knack of things however; make sure that all steps detailed on this guide are followed and your device is also properly calibrated so as to get very accurate readings from it.